NMDOT Parts Catalog Part 2

2/27/24, 9:58 AM

Help | Parameters Reference | Autodesk

Parameter

Parametric Value Required? Notes

Height of Underground Structure

This is a required parameter for circular and rectangular underground structures.

*USHeight

Yes

Total Diameter of Structure

This is a required parameter for circular underground structures. This is an optional parameter for rectangular underground structures. Note: This parameter is required if the part assembly has a Riser. This is a required parameter for rectangular underground structures. This is a required parameter for rectangular underground structures. This is an optional parameter for structures that have a transition section (e.g. concentric or eccentric cone) used to set the height of the section.

*USDiameter

Yes

Base Height (region where pipes connect) Total Width of Structure Total Length of Structure

*USBaseHeight

No

*USWidth

Yes

*USLength

Yes

Transition Section Height

USTransitionHeight

No

Note: Some additional parameters may also be needed, depending on the type of underground structure. For example: *SP prefixes indicate that a structure port parameter is used to match the surface structure to circular or rectangular underground structures in an assembly. SPLength and SPWidth are required parameters for rectangular underground structures, and are used to match the underground structure to the surface structure. SSLength & SSWidth are required parameters for rectangular surface structures.

Parametric Drainage Structures: Grates or Covers

Parametric Value Diameter of Cover

Parameter

Required? Notes

This is a required parameter for circular covers and grates.

*CGDiameter

Yes

This is a required parameter for circular and rectangular covers and grates.

*CGHeight

Height of Cover Yes

This is a required parameter for rectangular covers and grates.

*CGWidth

Width of Cover

Yes

https://help.autodesk.com/view/INFMDR/ENU/?guid=InfraWorks_DataExchange_NotInTheCollection_ExchangeDataWithAutodeskInventor_AboutAut… 4/6